(50) The 5 series is a 2 coil mechanical latch electrical reset power relay. It is panel mounted with screw terminals, and has 600 volt spacing. The 5 series is supplied with continuous duty coils, and is suitable for applications ranging from supervisory and interlocking functions to control of small motors, heaters, solenoids or for transferring power from a main auxiliary supply or load.
For Additional Configuration please contact the manufacturer.
(2) The 85 series relay is a panel mounted, screw terminal, open style sequencing relay. This two pole
relay has a single coil which operates a ratchet wheel. Control cams, on the ratchet wheel shaft, step
from one position to the next on each impulse to the coil. A 50 millisecond pluse will step the relay.
Coils are for momentary duty only. The 85 series may be supplied in any sequence up to 12 steps.
Contacts are single throw.
For Additional Configuration please contact the manufacturer.
(35) The 255 Series is a two coil latching version of the general purpose type 219 relay. When the
operate coil is momentarily energized, contacts transfer and remain so even after coil power is
removed. The second coil when momentarly energized, provides electrical reset of the contacts.
All contacts operate from a common armature to prevent contatct overlapping. Coils are rated for
continous duty. Both coils can be energized at the same time with no damage. The operate coil is
dominant.
For Additional Configuration please contact the manufacturer.
(16) The 311 Series relays are sequencing (stepper) relays built on the industrial 219 style frame. Hold
down clip is integral to the relay base. Double pole contacts transfer on energizing of coil or
de-energizing. Dual cam movement allows contacts to operate together or separately. Works
equally well with application of continous voltage to coil or energy saving impulse. No continuous
voltage required for memory. Numerous custom switching arrangements are possible over 8 steps
per revolution of the cams.
For Additional Configuration please contact the manufacturer.
(8) The 502 series is a solenoid-actuated, mechanically latched, electrically reset contactor. Once the 502
contacts close, they stay closed until a second command is sent to the reset coil. This contactor once
activated or deactivated, consumes no power and will remain in position, and not lose its memory no
matter how much time passes between signals. The design of the unique latching mechanism makes
the 502 highly resistant to shock and vibration without de-latching.
For Additional Configuration please contact the manufacturer.
(20) The 545 series is a three or four pole, double make, normally open, dual coil mechanical latch
contactor rated up to 7.5 HP. It will hold its last energized position indefinitely without requiring any
power itself. Contacts change state when the appropriate coil is energized. This makes the 545 series
especially well suited to battery driven devices, and to any application where power consumption or
coil heating must be minimized..
For Additional Configuration please contact the manufacturer.
